Juniper Networks opens up the optical line system

Juniper Networks has responded to the demands of the large-scale data centre players with an open optical line system architecture.

Donyel Jones-WilliamsThe system vendor has created software external to its switch, IP router and optical transport platforms that centrally controls the optical layer.

Juniper has also announced a reconfigurable optical add-drop multiplexer (ROADM) - the TCX1000 - that is Lumentum’s own white box ROADM design. Juniper will offer the Lumentum white box as its own, part of its optical product portfolio.

The open line system architecture, including the TCX1000, is also being pitched to communications service providers that want an optical line system and prefer to deal with a single vendor.

“Juniper plans to address the optical layer with a combination of software and open hardware in the common optical layer,” says Andrew Schmitt, founder and lead analyst at Cignal AI. “This is the solution it will bring to customers rather than partnering with an optical vendor, which Juniper has tried several times without great success.”

Click to read more ...

Telefónica tackles video growth with IP-MPLS network

• Telefónica’s video growth in one year has matched nine years of IP traffic growth 

• Optical mesh network in Barcelona will use CDC-ROADMs and 200-gigabit coherent line cards 

Telefónica has started testing an optical mesh network in Barcelona, adding to its existing optical mesh deployment across Madrid. Both mesh networks are based on 200-gigabit optical channels and high-degree reconfigurable add-drop multiplexers (ROADMs) that are part of the optical infrastructure that underpins the operator’s nationwide IP-MPLS network that is now under construction.

Maria Antonia CrespoThe operator decided to become a video telco company in late 2014 to support video-on-demand and over-the-top streaming video services.

Telefónica realised its existing IP and aggregation networks would not be able to accommodate the video traffic growth and started developing its IP-MPLS network.

Click to read more ...

Juniper Networks to acquire Aurrion for $165 million

The announcement of the acquisition was low key. A CTO blog post and a statement that Juniper Networks had entered into an agreement to acquire Aurrion, the fabless silicon photonics start-up. No fee was mentioned.

However, in the company's US Securities and Exchange Commission filing, Juniper values the deal at approximately $165 million. "The Company believes the acquisition will help to fuel its long-term competitive advantage by enabling cost-effective, high-density, high-speed optical networks," it said. The deal is expected to be closed this quarter.

Source: Gazettabyte

At first glance, Juniper is simply the latest in a series of systems vendors bringing silicon photonics in-house. Silicon photonics is a technology that allows photonic devices to be made on a silicon substrate, fabricated in a CMOS facility.

Click to read more ...

Colt's network transformation

Colt's technology and architecture specialist, Mirko Voltolini, talks to Gazettabyte about how the service provider has transformed its network from one based on custom platforms to an open, modular design.

It was obvious to Colt that something had to change. Its network architecture based on proprietary platforms running custom software was not sustainable; the highly customised network was cumbersome, resistant to change and expensive to run. The network also required a platform to be replaced -  or at least a new platform added alongside an existing one - every five to seven years.

Mirko Voltolini

"The cost of this approach is enormous," says Mirko Voltolini, vice president technology and architecture at Colt Technology Services. "Not just in money but the time it takes to roll out a new platform."

Instead, the service provider has sought a modular approach to network design using standardised platforms that are separated from each other. That way, a new platform with a better feature set or improved economics can be slotted in without impacted the other platforms. Colt calls its resulting network a modular multi-service platform (MSP).

Click to read more ...

Is Broadcom’s chip powering Juniper’s Stratus?

Briefing:  Data centre switching

Part 1: Single-layer switch architectures

Juniper Networks’ Stratus switch architecture, designed for next-generation data centres, is several months away from trials. First detailed in 2009, Stratus is being engineered as a single-layer switch with an architecture that will scale to support tens of thousands of 10 Gigabit-per-second (Gbps) ports.

Stratus will be in customer trials in early 2011.

Andy Ingram, Juniper Networks

Click to read more ...

Still some way to go

Briefing: Dynamic optical networking 

Part 1: The vision .... back in 2000

I came across this article (below) on the intelligent all-optical network. I wrote it in 2000 while working at the EMAP magazine, Communications Week International, later to become Total Telecom.

What is striking is just how much of the vision of a dynamic photonic layer is still to be realised.  Back then it had also been discussed for over a decade. And bandwidth management, like in 2000, is still largely at the electrical layer.

And yet much progress has been made in networking technology. But the way the network has evolved means that a more flexible photonic layer, while wanted by operators, is only one aspect of the network optimisation they seek to reduce the cost of transporting bits.

Click to read more ...

Differentiation in a market that demands sameness

Transceiver feature: Part 2

At first sight, optical transceiver vendors have little scope for product differentiation. Modules are defined through a multi-source agreement (MSA) and used to transport specified protocols over predefined distances.

 

“Their attitude is let the big guys kill themselves at 40 and 100 Gig while they beat down costs"

Vladimir Kozlov, LightCounting

Click to read more ...